DC-series

DC-series

All-In-One-Controller: Operate, View, Control, Move - no additional components are required to control the full scope of your application.

Wide variety of communication interfaces: Ethernet, EtherCAT, CANopen, Modbus, OPCuA, SNMP, BACnet, Profinet or EthernetIP. A high degree of networking with all leading fieldbus systems guarantees seamless communication.

Motion: Open interfaces, the support of many OEMs, CODESYS SoftMotion and CNC allow the user effective project management options for movement tasks.

Display 4", 7", 10", 15", 21": Different display sizes provide an optimal use of available space.

Display Controllers

Operation: Capacitive or resistive touchscreen with customized front foils and keyboards.

Variable performance requirements: From simple function to the use in complex machines, you only need one display controller.

Features

The all in one Display Controller is designed for use in complex machines. This has been made possible by using a powerful and scalable 800 MHz Arm® CPU with a Cortex™-A9 core. Also, the Display Controller can be programmed with the current CODESYS V3 software. In combination with the CODESYS SoftMotion package, technologically sophisticated multi-axis drive applications can be exploited. An extensive range of communication interfaces is integrated: Ethernet, EtherCAT, CANopen, RS232 and RS485. Additional protocols such as PROFINET, BACnet, SNMP, J1939, OPC UA, Powerlink, Ethernet/IP and Modbus are also available. Digital and analog I/O’s complement the functions. Applications include compact machines and building automation. For visualization the Display Controller uses CODESYS Target and Web Visu. The touchscreen device is furnished with a continuous CLEAN protective frontfoil.

  • Short cycle and fast response times
  • Consistent CODESYS V3 (programming, visualisation, communication and SoftMotion)
  • Easy configuration via web interface
  • CLEAN front with continuous protective foil
  • EtherCAT Master, CANopen Master

Improved performance at reduced cost: The 800 MHz Arm® CPU with Cortex™ A9 core brings the efficiency of PCs to small display controllers. This means substantial saving potential (e.g. due to the fact that expensive additional components are not required).

Comprehensive communication options: EtherCAT and CANopen masters are the most important interfaces for field communication. Powerful and modern EtherCAT I/O and drive components can be combined with tried and trusted CANopen devices. The Ethernet interface remains in the foreground when the controller communicates with the control level via TCP/IP. For industrial plants PROFINET and OPC UA is available. In building technology the controller can also communicate as BACnet controller. More protocols and serial interfaces complement the range of communication options.

Storage media and onboard I/Os: The gathering, processing and the storing of data using the Micro SD slot and USB interface is one of the most important PLC controller tasks. The display ontroller has four digital inputs and four digital outputs onboard, permitting the direct control of (for example) switches and signal lamps. These are complement by four universal analog voltage inputs, which can be combined into two 2/3-wire PT100(0) inputs.

Specifications

Description DC2004W DC2007W DC2115W
Art.No. 270010700 270010800 270010900
Display diagonals/resolution 4.3" display / 400x240 (WQVGA) 7" display / 800x480 (WVGA) 15,6" Display / 1366x768 (WXGA)
Touch operation Resistive
Colours 18 bit (3 x 6 RGB) TFT: 16,7 M (24 Bit/Pixel)
Dimensions WxHxD [mm] 161 x 103 x 35 224 x 152 x 38 425 x 280 x 55
Weight approx. 0.45 kg approx. 0.6 kg approx. 3 kg
Mounting Integrated securing clips Detachable securing clips
Certification CE (EN 61131-2) / CB Scheme (IEC 61010-2-201) / cULus (UL 61010-2-201)
Development environment CODESYS V3 (IEC61131-3)
CPU 800 MHz ARM® CPU with Cortex™ A9 single core (optional: dual or quad core)
RAM / Flash / Retain storage 128 MB RAM / 128 MB Flash / 100 kB FRAM (not including buffer battery) 256 MB RAM / 256 MB Flash / 100 kB FRAM 512 MB RAM / 2048 MB Flash / 100 kB FRAM
Communication interfaces
  • 1x Ethernet, 10/100 base, RJ45
  • 1x EtherCAT, RJ45
  • 1x CAN bus/CANopen master), RJ45 (opto-isolated)
  • 1x RS485, RJ45 (opto-isolated)
  • 1x RS232, RJ45 (opto-isolated)
Protocols
  • Standard: EtherCAT Master, CANopen Master
  • Optional: Modbus RTU M/S, Modbus TCP M/S, SNMP, OPC UA, J1939, Ethernet/IP, Powerlink, PROFINET, BACnet
Visualization Target Visu (Display), Web Visu (Web Server, HTML5)
Additional features
  • 2x USB 2.0 host / USB plug WR-COM Port A
  • 1x Micro SD card slot (SDHC Standard up to 32GB)
  • 1x Real-time clock, battery buffered
Digital I/O
  • 4x Digital Input
  • 4x Digital Output (0.5 A)
Analog I/O 4x universal Analog Input (-10V..+10V, 2x PT100/PT1000). Resolution: 24 Bit

Documentation

Title Date Size
PRODUCT CATALOG BERGHOF AUTOMATION AND CONTROL SOLUTIONS v4.1 2021-04 15.5 MB
CODESYS V3 EtherCAT: Controller för automation av maskiner och fastigheter 2016 2.8 MB
CODESYS V3 EtherCAT: Controller for automation of machines and buildings 2016 0.9 MB
TECHNICAL DATASHEET: DC2004 Display Controller 2016 0.2 MB
TECHNICAL DATASHEET: DC2007 Display Controller 2016 0.2 MB
TECHNICAL DATASHEET: DC2115 Display Controller 2016 0.2 MB
USER HANDBOOK 2.0: DC20XX, ET20XX, ECC2100 Slim. Dialog Controller, Ethernet Terminal 2016 4.9 MB
Download Controller Firmware & CODESYS target package    
HOW-TO: Setting user defined splash screen. BERGHOF ET2000/DC2000 2018 0.1 MB
FAQ - Frequently Asked Questions - please visit www.berghof-automation.com    
Further information - please visit www.berghof-automation.com    

Drawings

Title Art.No. Size
DC2004 270010700 9,7 MB
DC2007 270010800 11,6 MB
Filter  
Manufacturer  
Shopping Options
Manufacturer
View as Grid List

Items 37-38 of 38

Page
per page
View as Grid List

Items 37-38 of 38

Page
per page